Restoration Hardware Dining Table

Antique furniture can be difficult to recover, and trials can reduce its value. Even the best restoration hardware dining table work may reduce the value of unique and rare pieces. Properly carried out antique furniture restoration involves many steps and can be a time consuming and expensive process. If the antique furniture, you want to restore, is not particularly valuable, restore any damaged wood finish and will greatly enhance its beauty and usefulness. Most of the antique furniture have older finish that is slightly damaged by moisture or aging than modern finish.

Nice Restoration Hardware Dining Table

Antique furniture restoration hardware dining table can be performed in several ways. The most basic is the paint job, which involves sanding or stripping off the old finish, which removes any dings, scratches or scrapes, and applying a new finish. Seriously damaged or rotted furniture may require wood to be replaced with similar wood during the restoration process.

Related Posts:

In many cases, restoration hardware dining table of antique furniture actually reduces furniture value. Collectors of very old or historically significant pieces will normally see the original finish, although deficient or damaged, for authenticity’s sake. A piece that has been apparently refinished with modern products or modern hardware can be considered to be destroyed by a collector. If in doubt, get an antique expert for advice, before you perform the restoration.

Steps by Steps Restoration Hardware Dining Table

If you still confused how to restore dining table, may you follow this guideline to do it. An antique dining table is truly a gift for your home because it allows you to show off a piece of the past. This will allow your dining table to have interesting wood veneer pattern, pearl, horn or other sources. If your antique dining table with a post need some restoration, you need to approach it strategically.

Dip an old 3-inch brush in paint strippers and cover antique dining table with a thick coat. If you want to refinish the post well, cover it with color removal too. Allow it to penetrate for five minutes or the time recommended on the package. Because the stripper is penetrating, the sharp tip of metal paint scraper with a metal file. Scrape off the old finish of the antique dining table with your paint scraper. Wipe the dining table with a damp sponge to wipe it with old clean towels.

Press a piece of 100-grit sandpaper to the bottom of an electric sander. Run the sander over the antique dining table, remove the old finish it color removal could not get off. Repeat with a blade 220-grit sandpaper. Wipe the dining table with a tack cloth. Only sand post if you paint it too. Tape any parts of the dining table that you do not want to finish up with masking tape.

Dip a 3-inch foam brush in a jar of tinted polyurethane. Cover the antique dining table in a thin layer. This allows you to protect the wood of the antique while giving it a hint of color to help show off the grain. Only cover the post with polyurethane if you have painted it too. Let it dry for 24 hours.

6 Restoration Hardware Dining Table Photos

Comments are closed.